The Influence of the Human Factor on the Measurement Results Acquired by Using the Resistance Drilling Device RinnTech Resistograph R650-EA
Loading...
Date
2024-05-07
Authors
Dziadková, Aneta
Heřmánková, Věra
Anton, Ondřej
Szórád, Martin
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně,Fakulta stavební
Altmetrics
Abstract
The diagnostics of wooden structures using the detection drill RINNTECH Resistograph R650-EA is one of the popular semi-destructive methods. This article deals with the issue of the influence of the human factor on the measurement results. The recommended testing direction is the radial direction, perpendicular to the grain. However, the desired direction is sometimes difficult to maintain. The experiment takes into account three different factors that may occur during the testing. The goal is to determine to what extent the human factor affects the measured results. Thanks to the conducted research, it was found that gradual tilting of the device during measurements influences the measurements most significantly.
Description
Citation
Juniorstav 2024: Proceedings 26th International Scientific Conference Of Civil Engineering, s. 1-7. ISBN 978-80-86433-83-7.
https://juniorstav.fce.vutbr.cz/proceedings2024/
https://juniorstav.fce.vutbr.cz/proceedings2024/
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
© Vysoké učení technické v Brně,Fakulta stavební