Cohesion and adhesion of a sealant joint subjected to compressive stress

Simple item page
dc.contributor.authorBoháček, Adamcs
dc.contributor.authorBrandtner, Michalcs
dc.contributor.authorŠlanhof, Jiřícs
dc.coverage.volume385cs
dc.date.accessioned2024-02-20T09:46:16Z
dc.date.available2024-02-20T09:46:16Z
dc.date.issued2023-10-30cs
dc.description.abstractThis article is devoted to the evaluation of the suitability of the use of sealants when applied to a cement-based material and its subsequent exposure to compressive stress. Aquapanel cement board is chosen as the underlying material. In general, cementitious materials are characterized by a high concentration of dust particles on the surface, which prevent the correct adhesion of the sealant to the substrate, and therefore their sealing is often problematic. The sealants presented in this research are selected based on the manufacturer's recommendations for suitability for sealing cement-based materials. Base plates are made from cement board, which are subsequently sealed according to the procedures established by the ČSN EN ISO 11432 standard. The samples produced in this way are then cycled and their resistance to pressure stress is subsequently tested. The results of the test performed in this way are evaluated by measuring and visually evaluating the adhesion and cohesion of the cemented joint. Based on the results, it is possible to recommend all of the tested sealants for sealing cementitious base materials that are exposed to compressive stress.en
dc.formattextcs
dc.format.extent1-5cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationMATEC Web of Conferences. 2023, vol. 385, p. 1-5.en
dc.identifier.doi10.1051/matecconf/202338501012cs
dc.identifier.issn2261-236Xcs
dc.identifier.orcid0000-0001-9851-8825cs
dc.identifier.orcid0000-0003-1451-0899cs
dc.identifier.orcid0000-0001-7137-5705cs
dc.identifier.other185243cs
dc.identifier.urihttps://hdl.handle.net/11012/245081
dc.language.isoencs
dc.publisherEDP Sciencescs
dc.relation.ispartofMATEC Web of Conferencescs
dc.relation.urihttps://www.matec-conferences.org/articles/matecconf/abs/2023/12/matecconf_ys2023_01012/matecconf_ys2023_01012.htmlcs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2261-236X/cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectSealanten
dc.subjectcohesionen
dc.subjectadhesionen
dc.subjecttest sampleen
dc.titleCohesion and adhesion of a sealant joint subjected to compressive stressen
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-185243en
sync.item.dbtypeVAVen
sync.item.insts2024.02.20 10:46:16en
sync.item.modts2024.02.20 10:14:08en
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav technologie, mechanizace a řízení stavebcs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
matecconf_ys2023_01012.pdf
Size:
323.77 KB
Format:
Adobe Portable Document Format
Description:
file matecconf_ys2023_01012.pdf
Download
Collections
Ústav technologie, mechanizace a řízení staveb