Návrh technologie výroby vložky do vstřikovací formy
Loading...
Date
Authors
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato bakalářská práce se zabývá návrhem technologie výroby vyměnitelné vložky do vstřikovací formy. Hlavním cílem práce je zpracování technologického postupu výroby této součásti. V úvodní části práce je provedena rešerše technologií výroby vstřikovacích forem. Práce zahrnuje rovněž popis částí forem a jejich funkcí. Dále jsou zde popsány základní vlastnosti materiálů, které jsou pro výrobu vložek nejčastěji používané. Práce se zaměřuje na identifikaci vad forem v provozu i s jejich možnými příčinami. V práci jsou rovněž popsány výrobní technologie pro výrobu forem. Praktická část je zaměřená na navržení nového vzoru vyměnitelné složky, na volbu nástrojů, strojů a měřidel na výrobu nového vzoru vyměnitelné vložky. Je provedeno detailní zhodnocení dostupných možností a vybraných optimálních variant výroby pro dosažení požadované kvality a přesnosti výrobku. Na základě navržených technických požadavků je vypracován technologický postup výroby vložky do vstřikovací formy. Tento postup zahrnuje přesný popis jednotlivých výrobních operací, včetně výběru materiálu, tvorby výkresové dokumentace, volby měřidel a nástrojů, a programování drah nástrojů. Pomocí těchto drah byl zjištěn výrobní čas pro zvolené obráběcí stroje. Zjištěné výsledky jsou porovnány s časem výroby stejných vložek jiných vzorů a diskutovány možnosti racionalizace výrobního procesu s cílem dosáhnout maximální efektivity výroby.
This bachelor thesis is focused on the design of technology for the production of a removable insert into an injection mould. The main aim of the thesis is to elaborate the technological process of production of this component. In the introduction part of the thesis a research of technologies of production of injection moulds is carried out. The work also includes a description of the mold parts and their functions. Furthermore, the basic properties of the materials which are most commonly used for the production of inserts are described. The work is focused on the identification of mould defects in production and their possible causes. The thesis also describes the manufacturing technologies for the production of moulds.The practical part focuses on the design of a new pattern of replaceable component, the selection of tools, machines and gauges for the production of a new design of replaceable insert. A detailed assessment of the available options and the selected optimal production variants to achieve the quality and accuracy of the product is made. On the result of the proposed technical requirements, a technological procedure for the production of the insert to the injection mould. This process includes a precise description of the individual manufacturing operations, including material selection, drawing documentation, selection of gauges and tools, and programming of tool trajectories. Using these toolpaths, the production time for the selected machines was determined. The found results are compared with the production time of the same inserts of other designs and the possibilities of rationalizing the production process to achieve maximum production efficiency are discussed.
This bachelor thesis is focused on the design of technology for the production of a removable insert into an injection mould. The main aim of the thesis is to elaborate the technological process of production of this component. In the introduction part of the thesis a research of technologies of production of injection moulds is carried out. The work also includes a description of the mold parts and their functions. Furthermore, the basic properties of the materials which are most commonly used for the production of inserts are described. The work is focused on the identification of mould defects in production and their possible causes. The thesis also describes the manufacturing technologies for the production of moulds.The practical part focuses on the design of a new pattern of replaceable component, the selection of tools, machines and gauges for the production of a new design of replaceable insert. A detailed assessment of the available options and the selected optimal production variants to achieve the quality and accuracy of the product is made. On the result of the proposed technical requirements, a technological procedure for the production of the insert to the injection mould. This process includes a precise description of the individual manufacturing operations, including material selection, drawing documentation, selection of gauges and tools, and programming of tool trajectories. Using these toolpaths, the production time for the selected machines was determined. The found results are compared with the production time of the same inserts of other designs and the possibilities of rationalizing the production process to achieve maximum production efficiency are discussed.
Description
Citation
ZEMANOVÁ, M. Návrh technologie výroby vložky do vstřikovací formy [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Strojírenská technologie
Comittee
doc. Ing. Josef Sedlák, Ph.D. (předseda)
prof. Ing. Zdeněk Pokorný, Ph.D. (místopředseda)
Ing. Vladimír Maixner, MBA (člen)
Ing. Jan Zouhar, Ph.D. (člen)
Ing. Martin Slaný, Ph.D. (člen)
Date of acceptance
2023-06-13
Defence
Bakalářka seznámila komisi s obsahem a výsledky své bakalářské práce a zodpověděla otázky vedoucího, oponenta a dalších členů komise:
V průběhu obhajoby byly zodpovězeny následující doplňující otázky:
1. Byla provedena optimalizace obrábění vstřikovací formy?
zodpovězeno
2. Jak dochází v technologickém procesu dochází k otáčení formy?
částečně zodpovězeno
3. Jakým způsobem je možné obrábět dutinu s ostrými rohy?
zodpovězeno
Otázky členů komise byly zodpovězeny.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení