Výroba otočného čepu
Loading...
Date
Authors
Vávra, Roman
ORCID
Advisor
Referee
Mark
C
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Práce se zabývá návrhem vhodné technologie pro sériovou výrobu čepu. Materiálem dílce je konstrukční ocel 11 320 5R. Vzhledem k sériovosti výroby a úspoře materiálu byla zvolena technologie tváření zastudena. Pro výrobu byl navržen postupový lis HATEBUR jehož jmenovitá síla je 1 700 kN. Byl také navržen postupový nástroj a výkresová dokumentace nástrojů pro finální operaci. Zatížení nástroje bylo ověřeno manuálním výpočtem, a pomocí metody konečných prvků byl spočítán ohřev tvářeného polotovaru způsobený tvářením.
The thesis deals with the design of a suitable technology for serial production of a pin. The component material is structural steel 11,320 5R. Due to the series production and material savings, the molding technology was chosen to be cold. For production, the CM 4-5 ECO HATEBUR process press was designed with a nominal force of 1 700 kN. Progressive tool and drawing documentation of tools for the final operation were also designed. The tool load was verified by manual calculation, and the finite element method was calculated to heat the formed blank due to molding.
The thesis deals with the design of a suitable technology for serial production of a pin. The component material is structural steel 11,320 5R. Due to the series production and material savings, the molding technology was chosen to be cold. For production, the CM 4-5 ECO HATEBUR process press was designed with a nominal force of 1 700 kN. Progressive tool and drawing documentation of tools for the final operation were also designed. The tool load was verified by manual calculation, and the finite element method was calculated to heat the formed blank due to molding.
Description
Citation
VÁVRA, R. Výroba otočného čepu [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2017.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Strojírenská technologie
Comittee
prof. Ing. Milan Forejt, CSc. (předseda)
doc. Ing. Zdeněk Lidmila, CSc. (místopředseda)
Ing. Jiří Tomášek, CSc. (člen)
Ing. Jan Leimberger, CSc. (člen)
Ing. Ivo Dohnal, Ph.D. (člen)
doc. Ing. Bohumil Pacal, CSc. (člen)
Date of acceptance
2017-06-19
Defence
Student prezentoval komisi svou práci, její výstupy a závěry a zodpověděl dotazy oponenta. Dále byly studentovi položeny následující dotazy:
1. Definujte materiál uvedený v práci - SK 64 a jeho složení.
2. Vysvětlete označení materiálu polotovaru 11 320 5R.
3. Jak je vyráběná součást namáhána?
4. Vysvětlete na výkresech předepisovanou přesnost ISO 2768-mK.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení