Programovací prostředky pro robotizované pracoviště studené depozice kovů
Loading...
Date
Authors
Odehnal, Martin
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Diplomová práce se zaměřuje na vývoj softwaru pro robotické pracoviště, který je určen pro rychlou přípravu nástřiku pláště rotačních dílů s využitím technologie studené depozice kovu. Pracoviště pro studený nástřik je umístěno v laboratořích Ústavu materiálových věd a inženýrství na Fakultě strojního inženýrství VUT v Brně. Vytvořená aplikace poskytuje podporu pracovníkům ústavu pro experimentální činnosti v této oblasti. Teoretická část práce podrobně popisuje procesy spojené s virtuálním zprovozněním, programováním průmyslových robotů a základy technologie studeného nástřiku. Praktická část se věnuje konkrétní realizaci aplikace a integraci připojení externího motoru k robotickému kontroléru prostřednictvím komunikační sběrnice PROFINET.
The thesis focuses on the development of software for a robotic workstation designed for the rapid preparation of coating the surface of rotating parts using cold spray metal deposition technology. The cold spray workstation is located in the laboratories of the Institute of Materials Science and Engineering at the Faculty of Mechanical Engineering, Brno University of Technology. The developed application provides support for the institute's staff in experimental activities in this area. The theoretical part of the thesis aims to provide information to the processes associated with virtual commissioning, programming industrial robots, and the basics of cold spray technology. The practical part addresses the specific implementation of the software application and the integration of an external motor to the robotic controller via the PROFINET communication bus.
The thesis focuses on the development of software for a robotic workstation designed for the rapid preparation of coating the surface of rotating parts using cold spray metal deposition technology. The cold spray workstation is located in the laboratories of the Institute of Materials Science and Engineering at the Faculty of Mechanical Engineering, Brno University of Technology. The developed application provides support for the institute's staff in experimental activities in this area. The theoretical part of the thesis aims to provide information to the processes associated with virtual commissioning, programming industrial robots, and the basics of cold spray technology. The practical part addresses the specific implementation of the software application and the integration of an external motor to the robotic controller via the PROFINET communication bus.
Description
Citation
ODEHNAL, M. Programovací prostředky pro robotizované pracoviště studené depozice kovů [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
RNDr. Vladimír Opluštil (předseda)
doc. Ing. Robert Grepl, Ph.D. (místopředseda)
Ing. Dalibor Červinka, Ph.D. (člen)
doc. Ing. Jiří Krejsa, Ph.D. (člen)
Ing. Peter Zavadinka, Ph.D. (člen)
doc. Ing. Radoslav Cipín, Ph.D. (člen)
Ing. Vít Nezval, Ph.D. (člen)
Ing. Josef Ferda (člen)
mjr. Ing. Václav Křivánek, Ph.D. (člen)
Date of acceptance
2024-06-19
Defence
Při obhajobě student nejprve prezentoval svoji diplomovou práci, následně byly přečteny posudky a student odpovídal na dotazy oponenta. Poté byly členy komise položeny následující otázky:
Jaké knihovny používáte pro grafické prvky v GUI? Jak spolu komunikují sériový manipulátor s tryskou a manipulátor s obrobkem? Proč nelze nastřikovat excentrické součásti? Jaká je hroubka nástřiku?
Obhajoba byla komisí hodnocena jako velmi dobrá.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení