Analýza procesu laserového svařování korozivzdorné oceli v prostředí jaderných elektráren
Loading...
Date
Authors
Dostál, Martin
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Ústav soudního inženýrství
Abstract
Závěrečná práce se zabývá analýzou laserového svařování korozivzdorné oceli v prostředí jaderných elektráren. Hlavní motivací je zavádění nových technologií v rámci servisu a oprav na JE. Práce pojednává o možnostech aplikace ručního laserového svařování s rozmítáním svazku pro spojování austenitických korozivzdorných ocelí 1.4301 a 1.4404 o tloušťce 1,0 a 1,5 mm. Přídavný materiál je drát 316 LSi o průměru 0,8 mm. Na základě literární rešerše a posouzení současného stavu je identifikováno největší riziko, kterým je výskyt pórů ve svarech a dále jsou identifikovány klíčové vlivy na tento jev – ochranný plyn, amplituda a frekvence rozmítání svazku. Výsledky experimentu prokázaly zásadní vliv amplitudy na tvar svaru a také výrazný vliv ochranné atmosféry na vznik pórů. Použití dusíku vedlo k výrazně nižšímu výskytu pórů a doporučuje se pro laserové svařovací práce na JE jako hlavní opatření. Práce přináší důležité poznatky pro praxi i další výzkum.
The thesis deals with the analysis of laser welding of stainless steel in the environment of nuclear power plants. The main motivation is the introduction of new technologies in the field of service and repairs at nuclear power plants. The thesis discusses the possibilities of applying manual laser welding with beam oscillation for joining austenitic stainless steels 1.4301 and 1.4404 with a thickness of 1.0 and 1.5 mm. The filler material is 316 LSi wire with a diameter of 0.8 mm. Based on a literature review and assessment of the current state, the greatest risk is identified as the occurrence of pores in welds, and the key influences on this phenomenon are also identified – shielding gas, amplitude, and beam oscillation frequency. The results of the experiment demonstrated the fundamental influence of amplitude on the shape of the weld and also the significant influence of the protective atmosphere on the formation of pores. The use of nitrogen led to a significantly lower occurrence of pores and is recommended as the main measure for laser welding work at nuclear power plants. The work provides important insights for practice and further research.
The thesis deals with the analysis of laser welding of stainless steel in the environment of nuclear power plants. The main motivation is the introduction of new technologies in the field of service and repairs at nuclear power plants. The thesis discusses the possibilities of applying manual laser welding with beam oscillation for joining austenitic stainless steels 1.4301 and 1.4404 with a thickness of 1.0 and 1.5 mm. The filler material is 316 LSi wire with a diameter of 0.8 mm. Based on a literature review and assessment of the current state, the greatest risk is identified as the occurrence of pores in welds, and the key influences on this phenomenon are also identified – shielding gas, amplitude, and beam oscillation frequency. The results of the experiment demonstrated the fundamental influence of amplitude on the shape of the weld and also the significant influence of the protective atmosphere on the formation of pores. The use of nitrogen led to a significantly lower occurrence of pores and is recommended as the main measure for laser welding work at nuclear power plants. The work provides important insights for practice and further research.
Description
Citation
DOSTÁL, M. Analýza procesu laserového svařování korozivzdorné oceli v prostředí jaderných elektráren [online]. Brno: Vysoké učení technické v Brně. Ústav soudního inženýrství. 2025.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Řízení rizik technických systémů
Comittee
prof. Ing. Petr Dostál, CSc. (předseda)
doc. Ing. Radek Doskočil, Ph.D., MSc (místopředseda)
doc. RNDr. Zdeněk Karpíšek, CSc. (člen)
Ing. Petr Šimůnek, Ph.D. (člen)
Ing. et Ing. Kristýna Hrabová, Ph.D. (člen)
doc. Ing. Robert Kledus, Ph.D. (člen)
Date of acceptance
2025-06-26
Defence
Student nejprve prezentoval výsledky, kterých dosáhl v rámci své práce. Komise se poté seznámila s hodnocením vedoucího a posudkem oponenta práce. Student následně odpověděl na otázky oponenta a na další otázky přítomných členů komise:
1. doc. Doskočil položil otázku: Zamýšlel jste se nad ekonomickým zhodnocení opatření?
2. doc. Kledus položil otázku: Které problémy jste v DP řešil?
3. doc. Karpíšek položil otázku Jaká je finanční náročnost odstavení reaktoru?
4. dr. Šimůnek položil otázku: Podléhají zkoumané sváry pravidelným kontrolám?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení