Influence of the Type of Adhesive on the Properties of the GFRP Composite Adhesive Joint, Determined on the Basis of the Static T-Peel Test
Loading...
Date
2021-09-01
Authors
Kubit, Andrzej
Katrňák, Tomáš
Pytlowany, Tomasz
ORCID
0000-0002-6213-3875Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Sciendo
Altmetrics
Abstract
The article presents the results of experimental studies determining the influence of the type of adhesive on the static strength properties of the Glass Fiber Reinforced Polymer (GFRP) composite joint determined on the basis of the T-peel test. As part of the static tests on peeling joints, a comparison of peak load and stiffness for individual joints was made. The fracture surfaces were also analyzed, showing various failure mechanisms It was shown that the variant of joints made with the Enguard BP72A polyester adhesive was characterized by the highest strength properties with a mean peak load of 836.73 N.
Description
Citation
Advances in Materials Science. 2021, vol. 21, issue 3, p. 63-74.
https://www.sciendo.com/article/10.2478/adms-2021-0018
https://www.sciendo.com/article/10.2478/adms-2021-0018
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 Unported
http://creativecommons.org/licenses/by-nc-nd/3.0/
http://creativecommons.org/licenses/by-nc-nd/3.0/