Návrh tepelné komory pro trhací stroj
Loading...
Date
Authors
Blecha, Miroslav
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Tato práce se zaměřuje na rešerši současných teplotních komor, jejichž účelem je regulace teploty v prostorech, ve kterých probíhají mechanické zkoušky. V teoretické části jsou popsány metody a materiály běžně využívané v návrhu tepelných komor. Dále jsou v této pasáži popsané principy použitých elektrických komponent, jež jsou užity při zpracovávání druhé poloviny práce. V praktické části práce uvádí potřebné výpočty týkající se vlastností navrhované komory. Zamýšlené rozměry a tvar komory jsou podpořeny počítačovými simulacemi v programu SolidWorks. Dále je obsažen popis řídícího kódu jednak vytvořené tepelné komory a jednak skriptu zpracovávajícího naměřené hodnoty na straně PC. V~neposlední řadě praktická část obsahuje výkresovou dokumentaci pro výrobu tepelné komory určené pro trhací zařízení umístěné na Ústavu elektrotechnologií (FEKT, UETE).
This thesis focuses on the research of current temperature chambers, the purpose of which is to regulate the temperature in rooms where mechanical tests are carried out. The theoretical part describes the methods and materials commonly used in the design of thermal chambers. Furthermore, the principles of the electrical components used in the second half of the thesis are described in this passage. The practical part of the thesis presents the necessary calculations concerning the properties of the designed chamber. The intended dimensions and shape of the chamber are supported by computer simulations in SolidWorks. Furthermore, a description of the control code of both the designed thermal chamber and the script processing the measured values on the PC side is included. Last but not least, the practical part contains drawings for the production of a thermal chamber designed for a blasting device located at the Institute of Electrical Engineering (FEKT, UETE).
This thesis focuses on the research of current temperature chambers, the purpose of which is to regulate the temperature in rooms where mechanical tests are carried out. The theoretical part describes the methods and materials commonly used in the design of thermal chambers. Furthermore, the principles of the electrical components used in the second half of the thesis are described in this passage. The practical part of the thesis presents the necessary calculations concerning the properties of the designed chamber. The intended dimensions and shape of the chamber are supported by computer simulations in SolidWorks. Furthermore, a description of the control code of both the designed thermal chamber and the script processing the measured values on the PC side is included. Last but not least, the practical part contains drawings for the production of a thermal chamber designed for a blasting device located at the Institute of Electrical Engineering (FEKT, UETE).
Description
Citation
BLECHA, M. Návrh tepelné komory pro trhací stroj [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2025.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
prof. Ing. Jiří Kazelle, CSc. (předseda)
doc. Ing. Tomáš Binar, Ph.D. (místopředseda)
doc. Ing. Vítězslav Novák, Ph.D. (člen)
Ing. Pavel Čudek, Ph.D. (člen)
Ing. Zdenka Rozsívalová (člen)
Ing. Robert Bayer, PhD. (člen)
Ing. David Trochta (člen)
prof. RNDr. Petr Vanýsek, CSc. (člen)
Date of acceptance
2025-06-11
Defence
Student seznámil státní zkušební komisi s cíli a řešením závěrečné vysokoškolské práce a zodpověděl otázky a připomínky oponenta.
Dopňující otázky komise:
1) Lze na trhacím stroji zkoušet i vzorky vyrobené jiným způsobem než 3D tiskem?
2) Zvažoval jste i jiné způsoby připevnění vyhřívacího členu k tělu konstrukce?
3) V jakém teplotním rozsahu může komora fungovat?
4) Jak rychle se nastavená teplota v komoře ustálí?
5) Jak se liší naměřené teploty mezi termočlánky?
6) Teplota, která se nastaví se nastavuje na tělo komory, nebo na samotný vzorek?
7) Stačí měřit teplotu vzorku pouze jedním termočlánkem, je to dostačující?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení