Návrh vyvíječe páry 13 t/h
Loading...
Date
Authors
Pálka, Jaroslav
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Diplomová práce se zabývá návrhem vyvíječe páry, který je otápěný topnou párou z biomasové kotle. Produkována má být sytá technologická pára. Parametry technologické páry jsou nastavitelné dle provozních požadavků spotřebitele. Zpracován byl stručný úvod do přenosu tepla při fázových změnách. Bylo určeno zapojení vyvíječe do teplárenského okruhu. Návrh zahrnuje tepelný výpočet, návrh vstupních a výstupních hrdel a vybrané detaily konstrukce. Na závěr byl navržen základní systém regulace. Výsledkem práce je konstrukční výkres zařízení.
Master's thesis focuses on the design of a steam generator that utilizes superheated steam from a woodchip boiler for heating purposes. The steam generator produces saturated steam with variable parameters that depend on operational requirements. The integration of the steam generator into the thermal circuit is also taken into consideration. The primary objective of this thesis is to conduct through thermal calculations for the steam generator and design the inlets and outlets. In addition, a basic process control system has been designed.
Master's thesis focuses on the design of a steam generator that utilizes superheated steam from a woodchip boiler for heating purposes. The steam generator produces saturated steam with variable parameters that depend on operational requirements. The integration of the steam generator into the thermal circuit is also taken into consideration. The primary objective of this thesis is to conduct through thermal calculations for the steam generator and design the inlets and outlets. In addition, a basic process control system has been designed.
Description
Citation
PÁLKA, J. Návrh vyvíječe páry 13 t/h [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Energetické inženýrství
Comittee
Ing. Pavel Milčák, Ph.D. (člen)
Ing. Milan Kořista, Ph.D. (člen)
Ing. Jiří Škorpík, Ph.D. (člen)
Ing. Pavel Skoupý (člen)
prof. Ing. Jiří Pospíšil, Ph.D. (předseda)
doc. Ing. Marek Baláš, Ph.D. (místopředseda)
Date of acceptance
2023-06-14
Defence
Student odprezentoval obsah své diplomové práce. Otázky oponenta byly zodpovězeny. V průběhu obhajoby byly položeny tyto doplňující otázky: 1. Kolik je rozdíl mezi hladinami? 2. Jak jste určil teploty? Co ovlivní teplotu odplynění? 3. Jaký průměr mají trubky? Proč byly vybrány právě tyto geometrické parametry? 4. Proč jste vybrali právě uvedené materiály? 5. Oprava jednotek. 6. Volili nebo počítali jste tloušťky stěn? 7. Jakou úlohu má průtokoměr v systému? Otázky byly zodpovězeny.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení