Comparison of Adhesive Properties of Polyurethane Adhesive System and Wood-plastic Composites with Different Polymers after Mechanical, Chemical and Physical Surface Treatment

Simple item page
dc.contributor.authorNečasová, Barboracs
dc.contributor.authorLiška, Pavelcs
dc.contributor.authorKelar, Jakubcs
dc.contributor.authorŠlanhof, Jiřícs
dc.coverage.issue3cs
dc.coverage.volume11cs
dc.date.accessioned2020-08-04T11:02:19Z
dc.date.available2020-08-04T11:02:19Z
dc.date.issued2019-03-01cs
dc.description.abstractThe cost of most primary materials is increasing, therefore, finding innovative solutions for the re-use of residual waste has become a topic discussed more intensely in recent years. WPCs certainly meet some of these demands. The presented study is focused on an experimental analysis of the effect of surface treatment on the adhesive properties of selected WPCs. Bonding of polymer-based materials is a rather complicated phenomenon and modification of the bonded area in order to improve the adhesive properties is required. Two traditional types of surface treatments and one entirely new approach have been used: mechanical with sandpaper, chemical with 10 wt % NaOH solution and physical modification of the surface by means of a MHSDBD plasma source. For comparison purposes, two high-density polyethylene based products and one polyvinyl-chloride based product with different component ratios were tested. A bonded joint was made using a moisture-curing permanently elastic one-component polyurethane pre-polymer adhesive. Standardized tensile and shear test methods were performed after surface treatment. All tested surface treatments resulted in an improvement of adhesive properties and an increase in bond strength, however, the MHSDBD plasma treatment was proven to be a more suitable surface modification for all selected WPCs.en
dc.formattextcs
dc.format.extent1-17cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationPolymers. 2019, vol. 11, issue 3, p. 1-17.en
dc.identifier.doi10.3390/polym11030397cs
dc.identifier.issn2073-4360cs
dc.identifier.other155980cs
dc.identifier.urihttp://hdl.handle.net/11012/138315
dc.language.isoencs
dc.publisherMDPIcs
dc.relation.ispartofPolymerscs
dc.relation.urihttp://www.mdpi.com/2073-4360/11/3/397cs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2073-4360/cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectAdhesionen
dc.subjectAdhesiveen
dc.subjectBonden
dc.subjectCohesionen
dc.subjectCompositeen
dc.subjectJointen
dc.subjectMulti-hollow surface dielectric barrier discharge plasma source (MHSDBD)en
dc.subjectSandpaperen
dc.subjectWood-plastic composite (WPC)en
dc.titleComparison of Adhesive Properties of Polyurethane Adhesive System and Wood-plastic Composites with Different Polymers after Mechanical, Chemical and Physical Surface Treatmenten
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-155980en
sync.item.dbtypeVAVen
sync.item.insts2020.08.04 13:02:19en
sync.item.modts2020.08.04 12:21:25en
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav technologie, mechanizace a řízení stavebcs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
polymers1100397.pdf
Size:
4.55 MB
Format:
Adobe Portable Document Format
Description:
polymers1100397.pdf
Download
Collections
Ústav technologie, mechanizace a řízení staveb