Plnicí účinnost zážehového přeplňovaného motoru
Loading...
Date
Authors
Holas, Tomáš
ORCID
Advisor
Referee
Mark
C
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato bakalářská práce se zabývá plnicí účinností zážehového přeplňovaného motoru. První část práce je věnována rešerši na toto téma. V druhé části práce byla provedena analýza dat z motoru 1.5 TSI od koncernu Volkswagen získaných při testu WLTP. Tato analýza byla provedena za pomocí tvorby regresních modelů na naměřených datech a porovnáním jejich výsledků. Výsledkem této analýzy pak bylo určení hlavních běžně měřených parametrů na kterých je plnicí účinnost závislá.
This bachelor thesis deals with the topic of volumetric efficiency of a gasoline turbocharged engine. The first part of this thesis is devoted to research on this topic. In the second part of the thesis an analysis of data from a 1.5 TSI engine from the Volkswagen group line-up obtained during the WLTP test was performed. This analysis was achieved by the means of creating regression models on the measured data and comparing their results. The result of this analysis was the determination of the main ordinarily measured parameters on which the volumetric efficiency depends.
This bachelor thesis deals with the topic of volumetric efficiency of a gasoline turbocharged engine. The first part of this thesis is devoted to research on this topic. In the second part of the thesis an analysis of data from a 1.5 TSI engine from the Volkswagen group line-up obtained during the WLTP test was performed. This analysis was achieved by the means of creating regression models on the measured data and comparing their results. The result of this analysis was the determination of the main ordinarily measured parameters on which the volumetric efficiency depends.
Description
Citation
HOLAS, T. Plnicí účinnost zážehového přeplňovaného motoru [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Stavba strojů a zařízení
Comittee
doc. Ing. Petr Porteš, Ph.D. (předseda)
doc. Ing. Jiří Malášek, Ph.D. (místopředseda)
Ing. David Hloušek, Ph.D. (člen)
Ing. Jaroslav Kašpárek, Ph.D. (člen)
Ing. Jan Pokorný, Ph.D. (člen)
Date of acceptance
2023-06-15
Defence
Student prezentoval svou závěrečnou práci a odpověděl na otázky vedoucího i oponenta. Dále odpovídal na dotazy členů zkušební komise:
1) Jak byla použita data ve Vámi zvolené metodě? - odpověděl
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení