Elektronická cigareta
Loading...
Date
Authors
Brím, Lukáš
ORCID
Advisor
Referee
Mark
E
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Tato bakalářská práce je zaměřena na návrh elektronické cigarety. Práce popisuje části, ze kterých se elektronické cigarety skládají. Celé zařízení napájí bateriový článek, které lze nabíjet v zařízení přes USB konektor. Navrhnuté zařízení funguje na principu zahřívání odporového drátu v podobě spirály. Celé zařízení je ovládané pomocí mikrokontroleru, díky kterému lze ovládat jednotlivé pracovní režimy. Zařízení dokáže pracovat ve třech režimech, a to konkrétně v bypass režimu, režimu teplotní kontroly a wattovém režimu. Nastavení daných režimů probíhá pomocí taktilních spínačů a následně se nastavený výkon či teplota zobrazuje na displeji.
This bachelor thesis focuses on the design of an electronic cigarette. The thesis describes the parts that part of an electronic cigarette. The whole device is powered by a battery cell that can be charged in the device via a USB connector. The designed device works on the principle of heating a resistive wire in the form of a spiral. The whole device is controlled by a microcontroller, which makes it possible to control the different modes of operation. The device can operate in three modes namely bypass mode, temperature control mode and watt mode. The setting of the modes is done using tactile switches and then the set power or temperature is displayed on the display.
This bachelor thesis focuses on the design of an electronic cigarette. The thesis describes the parts that part of an electronic cigarette. The whole device is powered by a battery cell that can be charged in the device via a USB connector. The designed device works on the principle of heating a resistive wire in the form of a spiral. The whole device is controlled by a microcontroller, which makes it possible to control the different modes of operation. The device can operate in three modes namely bypass mode, temperature control mode and watt mode. The setting of the modes is done using tactile switches and then the set power or temperature is displayed on the display.
Description
Citation
BRÍM, L. Elektronická cigareta [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
doc. Ing. Lukáš Fujcik, Ph.D. (předseda)
RNDr. Ladislav Mareček, CSc. (místopředseda)
doc. Ing. Radovan Novotný, Ph.D. (člen)
Ing. Vladimír Levek, Ph.D. (člen)
Ing. Radim Hrdý, Ph.D. (člen)
Ing. Jiří Libich, Ph.D. (člen)
Date of acceptance
2024-06-11
Defence
Student seznámil státní zkušební komisi s cíli a řešením závěrečné vysokoškolské práce a zodpověděl otázky a připomínky oponenta. Dále odpověděl na otázky komise:
Co Vám v obvodu funguje a co nefunguje? Student popsal, které části obvodu mu fungují a které bloky nefungují. Není možné vynechat veškerou elektroniku, když zařízení řídíte manuálně? Student odpověděl, že má v cestě další obvody, které tomu zabraňují. Proč Vám nestačil zdroj při testování? Student vysvětlil jednotlivé režimy, na žádost komise. Není krabičky, kterou jste navrhl poměrně velká? Student vysvětlil, že se mu vejde do ruky. Co jste dorobil v rámci dopracování? Student popsal co dorobil v rámci posledního roku.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení