Load simulator dle ISO 11452 a CISPR25 ke světlometu určený pro zkoušky EMC
Loading...
Date
Authors
Drápal, Ladislav
ORCID
Advisor
Referee
Mark
E
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Diplomová práce se zabývá návrhem Load simulátoru, který bude použit při měření v EMC komoře. Load simulátor obsahuje celkem pět výstupních úrovní. V diplomové práci jsou řešeny výstupy pro směrová světla a výstup pro poziční světlo. Load simulátor se pro dané výstupy skládá z analogového řešení PWM generátoru. Sestavením generátoru pulzně šířkové modulace na nepájivém poli byla ověřena základní funkčnost zapojení. Změřené parametry byly porovnány se simulovanými. Základní schéma PWM generátoru bylo rozšířeno o doplňující komponenty, a mimo PWM generátor se vytvořil výstup optického řízení. Z důvodu umístění DPS do krabičky jsou vytvořeny dvě desky – deska pro napájení a deska s řídící a výkonovou částí. Měřením DPS se ověřila funkčnost zapojení a průběhy byly porovnány s realizací na nepájivém poli. Zkonstruovaný Load simulátor byl umístěn do EMC komory, kde se jednotlivými EMC testy ověřila jeho odolnost. Na závěr byly jednotlivé výsledky vyhodnoceny a popsána možná vylepšení.
The diploma thesis with the design of a Load simulator, which will be used during measurements in the EMC chamber. The Load simulator contains a total of five output levels. The diploma thesis solves outputs for directional lights and output for position light. The Load simulator consists of an analog solution of the PWM generator. By assembling a pulse width modulation generator on a solderless field, the basic functionality of the circuit was verified. The measured parameters were compared with the simulated ones. The basic scheme of the PWM generator was expanded with additional components, and an optical control output was created outside the PWM generator. By placing the printed circuit board in an aluminium box, two separate boards were created: one for the power supply and other for the control and performance part. which was not realized yet. The functionality of the circuit was verified by measuring on the PCB, and the waveforms were compared with the implementation on the solderless field. The constructed Load simulator was placed in the EMC chamber, where its resilience was tested through various EMC tests. Finally, the individual results were evaluated, and potential improvements were described.
The diploma thesis with the design of a Load simulator, which will be used during measurements in the EMC chamber. The Load simulator contains a total of five output levels. The diploma thesis solves outputs for directional lights and output for position light. The Load simulator consists of an analog solution of the PWM generator. By assembling a pulse width modulation generator on a solderless field, the basic functionality of the circuit was verified. The measured parameters were compared with the simulated ones. The basic scheme of the PWM generator was expanded with additional components, and an optical control output was created outside the PWM generator. By placing the printed circuit board in an aluminium box, two separate boards were created: one for the power supply and other for the control and performance part. which was not realized yet. The functionality of the circuit was verified by measuring on the PCB, and the waveforms were compared with the implementation on the solderless field. The constructed Load simulator was placed in the EMC chamber, where its resilience was tested through various EMC tests. Finally, the individual results were evaluated, and potential improvements were described.
Description
Citation
DRÁPAL, L. Load simulator dle ISO 11452 a CISPR25 ke světlometu určený pro zkoušky EMC [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
doc. Ing. Jaroslav Láčík, Ph.D. (předseda)
doc. RNDr. Jitka Dluhá, Ph.D. (místopředseda)
Ing. Michal Kubíček, Ph.D. (člen)
doc. Ing. Stanislav Vítek, Ph.D. (člen)
Ing. Josef Vychodil, Ph.D. (člen)
Date of acceptance
2024-06-04
Defence
Student prezentuje výsledky a postupy řešení své závěrečné práce. Student souhlasí s posudky. Následně váhavě odpovídá na dotazy vedoucího a oponenta práce a na dotazy členů zkušební komise.
Doc. Ing. Jaroslav Láčík, Ph.D. se ptal studenta na měření v EMC komoře – jak se nastavovaly polohy měřících antén. Student odpovídá a udává podle jakých norem udává důvody měření.
Ing. Michal Kubíček, Ph.D. se ptal studenta na důvod volby součástek. Student odpovídá a udává důvody.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení