Výpočtová predikce provozních parametrů kogeneračních jednotek
Loading...
Date
Authors
Kašpar, Jakub
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Zaměřením této práce jsou plynové kogenerační jednotky se spalovacím motorem. Cílem je představit a analyzovat predikční model s následnou úpravou a experimentální validací. Tomu předchází náležitý teoretický úvod do problematiky kogeneračních jednotek (KJ). Nejprve je nastíněna role KJ v transformaci současné energetiky, na kterou jsou kladeny stále větší nároky. Dále jsou stručně představeny typy KJ včetně jejich předností. Následuje detailní popis jejich konstrukce společně s faktory ovlivňujícími provozní parametry. Pro pochopení dané problematiky je kladen důraz na popis analytických vztahů z oboru termomechaniky a fyzikální chemie. Současně je také při modelování KJ využito znalostí získaných během studia a vlastních pracovních zkušeností z oblasti výroby kogeneračních jednotek. Výsledný predikční model vykazuje odchylky až 12 % vůči nominálním parametrům. Při validaci experimentálními daty vykazuje odchylku až 31,1 %. Obecně model není vhodný pro přesnou predikci provozních parametrů. Zároveň byl však úspěšně validován v rámci určení trendu závislostí provozních parametrů na koncentraci vodíku v palivu.
The focus of this work is on gas-fired combined heat and power (CHP) units with internal combustion engine. The aim is to present and analyse a prediction model with subsequent modification and experimental validation. This is preceded by a proper theoretical introduction to CHP units. First, the role of CHP in the transformation of the contemporary energy sector, which is under increasing demands, is outlined. Next, the types of CHP units are briefly introduced, including their advantages. This is followed by a detailed description of their design together with the factors influencing their operating parameters. For the understanding of the subject, emphasis is placed on the description of analytical relations in the field of thermomechanics and physical chemistry. Furthermore, the modelling of CHP is approached based on knowledge gained during the study and work experience in the field of CHP units. The final adjusted predictive model shows deviations of up to 12 % with respect to the nominal parameters. When validated with experimental data, it shows a deviation of up to 31,1 %. In general, the model is not suitable for accurate prediction of operating parameters. However, it has been successfully validated in determining the trend of the dependence of the operating parameters on the hydrogen concentration in the fuel.
The focus of this work is on gas-fired combined heat and power (CHP) units with internal combustion engine. The aim is to present and analyse a prediction model with subsequent modification and experimental validation. This is preceded by a proper theoretical introduction to CHP units. First, the role of CHP in the transformation of the contemporary energy sector, which is under increasing demands, is outlined. Next, the types of CHP units are briefly introduced, including their advantages. This is followed by a detailed description of their design together with the factors influencing their operating parameters. For the understanding of the subject, emphasis is placed on the description of analytical relations in the field of thermomechanics and physical chemistry. Furthermore, the modelling of CHP is approached based on knowledge gained during the study and work experience in the field of CHP units. The final adjusted predictive model shows deviations of up to 12 % with respect to the nominal parameters. When validated with experimental data, it shows a deviation of up to 31,1 %. In general, the model is not suitable for accurate prediction of operating parameters. However, it has been successfully validated in determining the trend of the dependence of the operating parameters on the hydrogen concentration in the fuel.
Description
Citation
KAŠPAR, J. Výpočtová predikce provozních parametrů kogeneračních jednotek [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
prof. Dr. Ing. Marcus Reppich (předseda)
prof. Ing. Petr Stehlík, CSc., dr. h. c. (místopředseda)
doc. Ing. Jaroslav Jícha, CSc. (člen)
prof. Ing. Zdeněk Jegla, Ph.D. (člen)
doc. Ing. Martin Pavlas, Ph.D. (člen)
doc. Ing. Vojtěch Turek, Ph.D. (člen)
Ing. Pavel Skryja, Ph.D. (člen)
Ing. Pavel Lošák, Ph.D. (člen)
Date of acceptance
2024-06-10
Defence
Student předvedl prezentaci závěrečné práce a zodpověděl dotazy oponenta práce.
Dotaz na konstrukční a materiálové problémy spojené se spalování vodíku, zodpovězeno.
Dotaz na způsob optimalizace využitý v práci a hodnoty použité při optimalizaci, zodpovězeno.
Diskuse o hodnotě stechiometrického poměru ve spalovacím motoru.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení