Wooden Facade and Determination of Strength of Bonded Timber Joints

Simple item page
dc.contributor.authorNečasová, Barboracs
dc.contributor.authorLiška, Pavelcs
dc.contributor.authorŠlanhof, Jiřícs
dc.coverage.volume3cs
dc.date.accessioned2017-08-15T14:47:25Z
dc.date.available2017-08-15T14:47:25Z
dc.date.issued2014-12-01cs
dc.description.abstractA research case focused on vented wooden façade system with bonded joints is presented in this paper. The potential of bonded joints is studied and described in more detail and verified through experimental measurements. For the purpose of tests spruce timber profiles were chosen for the load bearing substructure and Wooden plastic composite façade sheeting for the cladding. Three types of industrial adhesives intended for structural bonding were selected. The article is focused on the preparation as well as on the subsequent experimental verification of substructure bonding retention to the cladding. The adhesive bonds were tested both in tension as well as in shear at a temperature of (293.15+/-3) K and a relative humidity of (55+/-10) %. The test results proved the fact that bonded joints are more than suitable alternative to the mechanical joints. During the tests appeared some differences in stability and failure behaviour between the adhesive systems as well as within the sheeting material. Additionally, the suitability of selected group of adhesives in combination with wooden plastic cladding material as well as with the timber substructure was confirmed.en
dc.description.abstractA research case focused on vented wooden façade system with bonded joints is presented in this paper. The potential of bonded joints is studied and described in more detail and verified through experimental measurements. For the purpose of tests spruce timber profiles were chosen for the load bearing substructure and Wooden plastic composite façade sheeting for the cladding. Three types of industrial adhesives intended for structural bonding were selected. The article is focused on the preparation as well as on the subsequent experimental verification of substructure bonding retention to the cladding. The adhesive bonds were tested both in tension as well as in shear at a temperature of (293.15+/-3) K and a relative humidity of (55+/-10) %. The test results proved the fact that bonded joints are more than suitable alternative to the mechanical joints. During the tests appeared some differences in stability and failure behaviour between the adhesive systems as well as within the sheeting material. Additionally, the suitability of selected group of adhesives in combination with wooden plastic cladding material as well as with the timber substructure was confirmed.cs
dc.formattextcs
dc.format.extent331-335cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationARSA - Proceedings in ARSA - Advanced Research in Scientific Areas. 2014, vol. 3, p. 331-335.en
dc.identifier.isbn978-80-554-0958-0cs
dc.identifier.issn1338-9831cs
dc.identifier.other111147cs
dc.identifier.urihttp://hdl.handle.net/11012/69397
dc.language.isoencs
dc.publisherEDIS - Publishing Institution of the University of Zilinacs
dc.relation.ispartofARSA - Proceedings in ARSA - Advanced Research in Scientific Areascs
dc.relation.urihttp://arsa-conf.com/archive/?vid=1&aid=2&kid=60301-72cs
dc.rightsCreative Commons Attribution-NonCommercial 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1338-9831/cs
dc.rights.urihttp://creativecommons.org/licenses/by-nc/4.0/cs
dc.subjectLightweight façadesen
dc.subjectadhesion systemen
dc.subjectwooden composite façade claddingen
dc.subjectadhesionen
dc.subjectcohesion.en
dc.subjectLightweight façades
dc.subjectadhesion system
dc.subjectwooden composite façade cladding
dc.subjectadhesion
dc.subjectcohesion.
dc.titleWooden Facade and Determination of Strength of Bonded Timber Jointsen
dc.title.alternativeDřevěné fasády a pevnost lepeného spojecs
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-111147en
sync.item.dbtypeVAVen
sync.item.insts2020.04.01 11:00:56en
sync.item.modts2020.04.01 05:58:45en
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav technologie, mechanizace a řízení stavebcs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Wooden Facade and Determi.pdf
Size:
660.96 KB
Format:
Adobe Portable Document Format
Description:
Wooden Facade and Determi.pdf
Download
Collections
Ústav technologie, mechanizace a řízení staveb