Návrh a posouzení prefabrikované nosné konstrukce objektu
Loading...
Date
Authors
Knespl, Vojtěch
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Diplomová práce je zaměřena na návrh a posouzení prefabrikované nosné konstrukce objektu. Součástí práce je vypracování jednotlivých statických výpočtů pro zadané prvky, vypracování základních výkresů projektové dokumentace stavby a výkresů tvaru a výztuže řešených prvků v podrobnosti realizační dokumentace. V rámci statického výpočtu byly ověřeny střešní prvky, a to konkrétně ubíhaná vaznice, předem předepnutý sedlový vazník průřezu I. Dále byly řešeny obdélníkové sloupy, střešní nosné ztužidlo a stropní průvlak. Ve statickém výpočtu se nachází i předběžný návrh ostatních prvků konstrukce. Důležitou částí je i studie posouzení vlivu ztužení na konstrukci. Součástí práce je textová část, která obsahuje popis objektu, konstrukčního systému, jednotlivých prvků, zatížení, modelu a technologického postupu výstavby. Výpočty byly provedeny za pomoci programů Scia Engineer 22.0, IDEA StatiCa a Microsoft Excel.
The master´s thesis is focused on the design and assessment of a prefabricated load-bearing structure of a building. It includes the development of individual static calculations for the specified elements, the creation of basic drawings of the project's construction documentation, and drawings of the shape and reinforcement of the addressed elements in the detail of the execution documentation. Within the static calculations, roof elements were verified, specifically sliding purlins and pre-tensioned pitched trusses with an I cross-section. Rectangular columns, roof load-bearing braces, and ceiling beams were also addressed. The static calculations include a preliminary design of other structural elements. An important part is the study of the impact of bracing on the structure. The thesis also contains a textual section that describes the building, the structural system, individual elements, loads, models, and the construction technology process. The calculations were performed using the software programs Scia Engineer 22.0, IDEA StatiCa, and Microsoft Excel.
The master´s thesis is focused on the design and assessment of a prefabricated load-bearing structure of a building. It includes the development of individual static calculations for the specified elements, the creation of basic drawings of the project's construction documentation, and drawings of the shape and reinforcement of the addressed elements in the detail of the execution documentation. Within the static calculations, roof elements were verified, specifically sliding purlins and pre-tensioned pitched trusses with an I cross-section. Rectangular columns, roof load-bearing braces, and ceiling beams were also addressed. The static calculations include a preliminary design of other structural elements. An important part is the study of the impact of bracing on the structure. The thesis also contains a textual section that describes the building, the structural system, individual elements, loads, models, and the construction technology process. The calculations were performed using the software programs Scia Engineer 22.0, IDEA StatiCa, and Microsoft Excel.
Description
Keywords
Montovaná hala, rámová konstrukce, železobetonový skelet, předem předepnutý vazník, vaznice, sloupy, ztužidla, průvlaky, hlavice, krátká konzola, statický výpočet, výkres tvaru, výkres výztuže, model, montáž, teorie 2. řádu, vliv ztužení, Prefabricated hall, frame structure, reinforced concrete skeleton, pre-tensioned beam, purlin, columns, bracing, beams, header, short bracket, static calculation, shape drawing, reinforcement drawing, model, assembly, second order theory, effect of bracing
Citation
KNESPL, V. Návrh a posouzení prefabrikované nosné konstrukce objektu [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2025.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
doc. Ing. Viktor Borzovič, Ph.D. (předseda)
doc. Ing. Miloš Zich, Ph.D. (místopředseda)
doc. Ing. Radim Nečas, Ph.D. (člen)
doc. Ing. František Girgle, Ph.D. (člen)
Ing. Ivana Švaříčková, Ph.D. (člen)
prof. Ing. Jiří Kala, Ph.D. (člen)
Ing. Ondřej Januš, Ph.D. (člen)
Date of acceptance
2025-02-05
Defence
Student prezentoval výsledky své diplomové práce před komisí a následně reagoval na připomínky oponenta.
Dotazy k diplomové práci:
Prof. Borzovič – Z čeho jste vycházeli při vyztužování smykovou výztuží v okolí kruhových otvorů vazníků? – student odpověděl
Doc. Zich – Jakým způsoben je uložen vazník do podpor? – student odpověděl
Doc. Zich – Je vazník vůči osy sloupů vyosen? – student odpověděl
Doc. Zich – Jakou vzpěrnou délku jste návrhy pro sloupy? – student odpověděl
Prof. Borzovič – Jak jste uvažovali uložení vazníku na průvlaky a máte nějaký detail? – student odpověděl
Doc. Zich – jakým způsobem se budou zvedat prefabrikované sloupy? – student odpověděl
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení