Parkovací dům
Loading...
Date
Authors
Růžička, Jan
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Cílem práce je návrh nosné ocelové konstrukce parkovacího domu v centru města Brna. Půdorysné rozměry objektu jsou 29 x 77,5 m s dispozičně volným rohem o rozměrech 5 x 12,5 m v jihovýchodní části konstrukce. Konstrukce parkovacího domu má 4 nadzemní podlaží stejného půdorysného uspořádání a 5. nadzemní podlaží, které zaujímá prostor pouze ve střední části konstrukce. Výška jednotlivých podlaží je 3,5 m. Celková výška konstrukce v místě zastřešeného 5. nadzemního podlaží je 17,5 m, v místě bez zastřešení 14 m. Hlavní nosnou částí je prostorový skelet o 7 polích v podélném směru a 5 polích v příčném směru. Prostorový skelet je tvořen sloupy a podélnými a příčnými průvlaky. Mezi podélnými průvlaky jsou kloubově uloženy spřažené ocelobetonové stropnice. Konstrukce parkovacího domu je řešena ve 3 variantách, v nichž je uvažováno rozdílné uložení sloupů na základovou konstrukci a rozdílné uložení příčných a podélných průvlaků na sloupy. Výsledná varianta byla podrobně zpracována. Opláštění střechy bude provedeno pomocí sendvičových panelů a opláštění stěn konstrukce bude provedeno pomocí skleněných tabulí. Výpočet je proveden pomocí programu Scia Engineer 2014 a ručním výpočtem.
The aim of the thesis is to design a steel structure of the parking building in the center of Brno. The plan dimensions of the building are 29 x 77.5 m including a missing corner of the dimensions 5 x 12.5 m in the southeast part of the construction. The construction of the parking building has 4 above-ground floors with the same layout and the fifth floor situated only in the middle section of the construction. Each floor is 3.5 m high. The total height of the construction in the place of the roofed part of the fifth floor is 17.5 m, otherwise 14 m. A spatial frame is the main load-bearing part consisting of 7 fields in the longitudinal direction and 5 fields in the transversal direction. The spatial frame is formed of columns and longitudinal and transversal girders. Steel-concrete composite joists are pin-supported among longitudinal girders. The construction of the parking building is solved in three versions considering different placing of columns to the base structure and different placing of longitudinal and transversal girders to the columns. The resulting draft is worked out in details. Roof cladding will be made using sandwich panels and walls will be made out of glass panels. The calculation has been done in Scia Engineer 2014 program and by manual calculation.
The aim of the thesis is to design a steel structure of the parking building in the center of Brno. The plan dimensions of the building are 29 x 77.5 m including a missing corner of the dimensions 5 x 12.5 m in the southeast part of the construction. The construction of the parking building has 4 above-ground floors with the same layout and the fifth floor situated only in the middle section of the construction. Each floor is 3.5 m high. The total height of the construction in the place of the roofed part of the fifth floor is 17.5 m, otherwise 14 m. A spatial frame is the main load-bearing part consisting of 7 fields in the longitudinal direction and 5 fields in the transversal direction. The spatial frame is formed of columns and longitudinal and transversal girders. Steel-concrete composite joists are pin-supported among longitudinal girders. The construction of the parking building is solved in three versions considering different placing of columns to the base structure and different placing of longitudinal and transversal girders to the columns. The resulting draft is worked out in details. Roof cladding will be made using sandwich panels and walls will be made out of glass panels. The calculation has been done in Scia Engineer 2014 program and by manual calculation.
Description
Keywords
Parkovací dům, vícepatrová budova, rampa, parkovací stání, prostorový rám, spřažená ocelobetonová stropnice, paždík, průvlak, sloup, spřažení, spřahovací trn, šroubové přípoje, kloubová patka, lokalita Brno., Parking building, multi-story building, ramp, parking space, spatial frame, steel-concrete composite joist, side runner, girder, column, interconnection, shear stud, screw connection, simple column base, locality Brno.
Citation
RŮŽIČKA, J. Parkovací dům [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2016.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Konstrukce a dopravní stavby
Comittee
Date of acceptance
2016-02-03
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení