Mechanické vlastnosti polymerů vyrobených 3D tiskem
Loading...
Date
Authors
Král, Filip
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Práce se zabývá hodnocením závislosti materiálových charakteristik na anizotropii polymerů Nylon 12 a Ultem 9085 vyrobených 3D tiskovou technologií Fused Deposition Modeling. Hodnocení materiálových charakteristik bylo provedeno na základě zkoušek tahem a neinstrumentovaných rázových zkoušek. Bylo dokázáno, že materiálové charakteristiky jsou silně závislé na anizotropii, tj. na velikosti a směru nanášeného vrstvení obou typů polymerů.
The thesis deals with the dependence of mechanical characteristics on the anisotropy of polymers Nylon 12 and Ultem 9085 made by a 3D printing technology Fused Deposition Modeling (FDM). The evaluation of the material characteristics was performed on the basis of tensile and non-instrumental impact tests. It was proven that the material characteristics are strongly dependent on anisotropy, i.e. on layer thickness and raster angle for both types of polymers.
The thesis deals with the dependence of mechanical characteristics on the anisotropy of polymers Nylon 12 and Ultem 9085 made by a 3D printing technology Fused Deposition Modeling (FDM). The evaluation of the material characteristics was performed on the basis of tensile and non-instrumental impact tests. It was proven that the material characteristics are strongly dependent on anisotropy, i.e. on layer thickness and raster angle for both types of polymers.
Description
Citation
KRÁL, F. Mechanické vlastnosti polymerů vyrobených 3D tiskem [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2018.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Materiálové inženýrství
Comittee
prof. Ing. Ivo Dlouhý, CSc. (předseda)
prof. Ing. Rudolf Foret, CSc. (místopředseda)
Ing. Martin Zelený, Ph.D. (člen)
prof. RNDr. Karel Maca, Dr. (člen)
prof. Mgr. Tomáš Kruml, CSc. (člen)
prof. Ing. Jiří Švejcar, CSc. (člen)
Date of acceptance
2018-06-13
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení