Administrativní budova
Loading...
Date
Authors
Kovařík, Tomáš
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Předmětem diplomové práce je návrh environmentálně vyspělé administrativní budovy pro stavební povolení. Projekt je rozdělen na 3 části. První část je zaměřená na projektovou dokumentaci pro stavební povolení. Budova je situována ve městě Letovice, na jejím východním okraji zástavby. Objekt je navržený jako dřevostavba s železobetonovým jádrem, je samostatně stojící třípodlažní podsklepený, zastřešený plochou střechou, která má více výškových úrovní. Jednotlivá podlaží jsou propojena schodištěm a výtahem. V podzemním podlaží jsou navrženy místnosti zabezpečující technický provoz budovy. V prvním nadzemním je umístěna prodejna se showroomem, kancelář a hygienické zázemí pro zákazníky a zaměstnance budovy, ve druhém nadzemním podlaží jsou umístěny pouze kanceláře s denní místností a hygienické zázemí. Druhá část obsahuje návrhy technických zařízení budovy, mezi které patří umělé osvětlení, hospodaření s dešťovou vodou. Dále návrh nuceného větrání s rekuperací, které zajišťují 2 vzduchotechnické jednotky. Vytápění a chlazení je zajištěno soustavou 2 tepelných čerpadel vzduch/voda s kombinací topných tyčí. Umístěných v akumulační nádobě. Teplo z otopné soustavy je distribuováno pomocí podlahového vytápění, v letním období jsou jako zdroje chladu navrženy fancoily. Nakonec návrh fotovoltaických panelů, které jsou v počtu 35 kusů umístěny na ploché střeše objektu. Třetí část práce je zaměřena na posouzení detailu atiky a zateplení ploché střechy z hlediska tepelné techniky. Návrh obsahuje 2 varianty skladby střechy, které jsou porovnány a vyhodnoceny z hlediska tepelných a ekonomických.
The aim of the thesis is to develop designs of an office building at the level of building permit application. The thesis is divided into three parts. The first part focuses on the architectural and structural designs. The building is situated on the eastern edge of Letovice. It is designed as a three-story detached building with a basement. The roof is flat with multiple hight levels. The floors are connected by stairs and an elevator. The underground level includes utility rooms. The first floor contains a sales area with a showroom, offices, and sanitary facilities for customers and employees. The second floor contains offices and sanitary facilities for employees. The second part includes designs of HVAC, including lighting and rainwater management system. Mechanical ventilation with heat recovery is provided by two ventilation units in utility room. Heating and cooling is provided by two air-water heat pumps. The heat is distributed through floor heating, while cooling is achieved through fan coils. Photovoltaic plant consisting of 35 panels is located on the roof. The third part of the thesis focuses on thermal and cost assessment of two variants of assembly detail of the parapet wall and thermal insulation of the flat roof. I chose the traditional composition because the reverse composition of thermal isolation freezes in winter.
The aim of the thesis is to develop designs of an office building at the level of building permit application. The thesis is divided into three parts. The first part focuses on the architectural and structural designs. The building is situated on the eastern edge of Letovice. It is designed as a three-story detached building with a basement. The roof is flat with multiple hight levels. The floors are connected by stairs and an elevator. The underground level includes utility rooms. The first floor contains a sales area with a showroom, offices, and sanitary facilities for customers and employees. The second floor contains offices and sanitary facilities for employees. The second part includes designs of HVAC, including lighting and rainwater management system. Mechanical ventilation with heat recovery is provided by two ventilation units in utility room. Heating and cooling is provided by two air-water heat pumps. The heat is distributed through floor heating, while cooling is achieved through fan coils. Photovoltaic plant consisting of 35 panels is located on the roof. The third part of the thesis focuses on thermal and cost assessment of two variants of assembly detail of the parapet wall and thermal insulation of the flat roof. I chose the traditional composition because the reverse composition of thermal isolation freezes in winter.
Description
Citation
KOVAŘÍK, T. Administrativní budova [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
prof. Ing. Milan Ostrý, Ph.D. (místopředseda)
Ing. Sylva Bantová, Ph.D. (člen)
Ing. Karel Struhala, Ph.D. (člen)
Ing. Petr Jelínek, Ph.D. (člen)
Ing. Petr Blasinski, Ph.D. (člen)
Ing. Ondřej Pilný, Ph.D. (člen)
prof. Boris Bielek, PhD. (předseda)
Date of acceptance
2024-01-29
Defence
1) Koordinační situace - Jakou vyhláškou se řídí rozsah a obsah projektové dokumentace pro vydání stavebního povolení. Co má obsahovat koordinační situační výkres dle této vyhlášky.
- přechodné období?
- obousměrná komunikace? Máte dobře rozhledový trojúhlník?
2) D.1.1.01 – Půdorys 1.PP - Popište napojení vnitřní kanalizace na veřejný řad vzhledem k výškovému uspořádání objektu.
3) D.1.1.05 – Řez A-A - Vysvětlete napojení podsklepené a nepodsklepené části domu. Jak bude uložena podkladní betonová deska nepodsklepené části domu v místě napojení na podsklepenou část.
4) D.1.2.01 – Základy - Vysvětlete postup provádění železobetonových základových pásů.
- krytí výztuže
Student s dokonalým přehledem zaujímal odborná stanoviska ke všem připomínkám oponenta a výborně reagoval i na všechny otázky členů komise, které byly k obhajované práci položeny.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení