Kalibrační postupy etalonu Datron 4920
Loading...
Date
Authors
Schinneck, Jakub
ORCID
Advisor
Referee
Mark
C
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Tato diplomová práce se zabývá kalibračními postupy měřicího etalonu střídavého napětí Datron 4920. První část představuje základní pojmy metrologie, její historii a organizace věnující se metrologii. Práce popisuje střídavé napětí na nejvyšší metrologické úrovni prostřednictvím AC/DC diference. Teoretická část také popisuje měřicí etalon střídavého napětí Datron 4920 a jeho měřicí funkce společně s kalibračním postupem. Hlavním cílem práce je vytvoření metodiky kalibrace AVMS Datron 4920. Na základě vytvořené kalibrační metodiky je sestaven vývojový diagram aplikace pro proceduru kalibrace. Praktická část pokračuje programováním aplikace pro kalibraci AVMS Datron 4920 podle vytvořených vývojových diagramů. Na závěr je aplikace otestována ve vybraných bodech měření a je proveden rozbor nejistot měření.
This master’s deals with the calibration routines of the alternating voltage measurement standard Datron 4920. The first part introduces the basic terminology of metrology, its history and organizations specializing in metrology. The thesis describes the alternating voltage at the highest metrological level through AC/DC difference. The theoretical part also describes the alternating voltage measurement standard Datron 4920 and its measurement functions together with the calibration routines. The main aim of thesis is to create the calibration procedures AVMS Datron 4920. Based on the created calibration procedures, a flowchart of application for calibration routines is designed. The practical part then continues with programming application for calibrating AVMS Datron 4920 based on the created flowchart. In conclusion, the application is tested at selected points of measurement and an analysis of measurement uncertainties is carried out.
This master’s deals with the calibration routines of the alternating voltage measurement standard Datron 4920. The first part introduces the basic terminology of metrology, its history and organizations specializing in metrology. The thesis describes the alternating voltage at the highest metrological level through AC/DC difference. The theoretical part also describes the alternating voltage measurement standard Datron 4920 and its measurement functions together with the calibration routines. The main aim of thesis is to create the calibration procedures AVMS Datron 4920. Based on the created calibration procedures, a flowchart of application for calibration routines is designed. The practical part then continues with programming application for calibrating AVMS Datron 4920 based on the created flowchart. In conclusion, the application is tested at selected points of measurement and an analysis of measurement uncertainties is carried out.
Description
Keywords
Datron 4920, střídavé napětí, AC/DC diference, AC/DC porovnávací etalon, kalibrace, Fluke 792A, měření, etalon, návaznost, metodika, metrologie, ČMI, LabVIEW, vývojový diagram, Datron 4920, alternating voltage, AC/DC difference, AC/DC transfer standard, calibration, Fluke 792A, measurement, standard, traceability, calibration procedures, metrology, ČMI, LabVIEW, flowchart
Citation
SCHINNECK, J. Kalibrační postupy etalonu Datron 4920 [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2016.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Kybernetika, automatizace a měření
Comittee
doc. Ing. Bohumil Horák, Ph.D. (předseda)
doc. Ing. Petr Blaha, Ph.D. (místopředseda)
doc. Ing. František Zbořil, CSc. (člen)
Ing. Miloslav Richter, Ph.D. (člen)
Ing. Soňa Šedivá, Ph.D. (člen)
Date of acceptance
2016-06-07
Defence
Student obhájil diplomovou práci s výhradami.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení