Ovládání periférií webovým rozhraním systému s 8 bit. mikroprocesorem
Loading...
Date
Authors
Majerčík, Miloš
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Obsahem této diplomové práce je popis a realizace ovladače vybraných periferních zařízení pomocí procesorového modulu RabbitCore RCM3700 založeného na mikroprocesoru Rabbit 3000 s možností ovládání pomocí webového rozhraní. Ovládaní zařízení pomocí webového rozhraní nabírá v dnešní době vysokých nároků spotřebitelů na významu. Interaktivita takových zařízení sahá od jednoduchého oznamování událostí např. pomocí SMS zpráv po komplexní řídicí systémy pro domácnosti tvořící základ inteligentních domů. Spotřebitel si dnes může vybrat z hotových, ale poměrně drahých řešení, nebo si vybuduje takový systém sám. Jako první možnost pro stavbu svépomoci se nabízí osobní počítač. Druhá, složitější ale v konečném důsledku efektivnější je možnost využití jednočipových mikroprocesorů. V této práci byla využita právě druhá možnost a byl vybrán modul s mikroprocesorem se zabudovaným síťovím rozhraním. K tomuto modulu byly jako periferie vybrány LCD displej a digitální teplotní senzory. Tyto periferie byly blíže specifikovány a také i jejich popis ovládání. Na základě těchto informací je v závěru práce navržena hardwarová i softwarová část ovladače a je v práci uvedena spolu s její stručným popisem.
This diploma thesis deals with description and subsequent implementation of web interface and control device for selected periphery devices through the use of processor module RabbitCore RCM3700 which is based on microprocessor Rabbit 3000. The importance of web interface based control is currently raised because of higher customers’ claims. Interactivity of these devices contains wide range of services, from simple event communication by text messages to complex driving systems for home which create the base of intelligent house. The customer can choose either the complete and more expensive solution or self-created one. There are two possible ways of creation. The first way is through the use of personal computer. The second one, more complex but also more effective, is by single-chip microprocessor. In this thesis the second one way is used. The module with processor with build-in web interface was used. Description and the way of control are given for this module and also for selected periphery devices, the LCD and digital temperature sensors. At the end the hardware and software part of control device is designed on the basis of gained information. The thesis contains also its brief description.
This diploma thesis deals with description and subsequent implementation of web interface and control device for selected periphery devices through the use of processor module RabbitCore RCM3700 which is based on microprocessor Rabbit 3000. The importance of web interface based control is currently raised because of higher customers’ claims. Interactivity of these devices contains wide range of services, from simple event communication by text messages to complex driving systems for home which create the base of intelligent house. The customer can choose either the complete and more expensive solution or self-created one. There are two possible ways of creation. The first way is through the use of personal computer. The second one, more complex but also more effective, is by single-chip microprocessor. In this thesis the second one way is used. The module with processor with build-in web interface was used. Description and the way of control are given for this module and also for selected periphery devices, the LCD and digital temperature sensors. At the end the hardware and software part of control device is designed on the basis of gained information. The thesis contains also its brief description.
Description
Citation
MAJERČÍK, M. Ovládání periférií webovým rozhraním systému s 8 bit. mikroprocesorem [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2008.
Document type
Document version
Date of access to the full text
Language of document
sk
Study field
Telekomunikační a informační technika
Comittee
doc. Ing. Vít Novotný, Ph.D. (předseda)
doc. Ing. Miloš Orgoň, Ph.D. (místopředseda)
prof. Ing. Jiří Mišurec, CSc. (člen)
Ing. Tomáš Zeman, Ph.D. (člen)
doc. Ing. Radim Burget, Ph.D. (člen)
doc. Ing. Jiří Schimmel, Ph.D. (člen)
Ing. Anna Kubánková, Ph.D. (člen)
Ing. Jiří Kouřil (člen)
doc. Ing. Jan Jeřábek, Ph.D. (člen)
Date of acceptance
2008-06-10
Defence
Jakým způsobem byl realizovaný napájecí zdroj?
K čemu využíváte napěťovou referenční diodu?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení