Conceptual Design Method for Energy Retrofit of Waste Gas-to-Energy Units

Loading...
Thumbnail Image
Date
2022-06-01
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
SDEWES Centre
Altmetrics
Abstract
Many industrial waste gasses, especially from chemical and petrochemical processes, contain combustible substances enabling their utilization as a promising energy source. Thermal oxidation represents a suitable and proven technology, which is, however, very energy intensive in terms of external fuel demand dependent on exhaust heat recovery efficiency. This paper presents a systematic method developed for the Energy Retrofit of industrial units for thermal oxidation of waste gasses (waste gas-to-energy units) in order to improve the units´ waste heat recovery and thus to reduce the external energy demand. Thisresults in the reduction of operational costs and emissions and improves waste gas energy utilization.The method procedure is further applied to Energy Retrofit of a specific waste gas to energy unit, where the fuel saving of over 30% was achieved by the proposed conceptual modifications with a payback period of only 5.5 months. Finally, the developed method accuracy was successfully verified by the comparison with results of non-linear simulation.
Description
Citation
Journal of Sustainable Development of Energy, Water and Environment Systems. 2022, vol. 10, issue 2, p. 1-19.
https://www.sdewes.org/jsdewes/pid9.0396
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution 4.0 International
http://creativecommons.org/licenses/by/4.0/
Citace PRO